Egg conveyors (rod conveyors)

Egg conveyors (rod conveyors)

Farmtec egg conveyors can be combined with any make and type of poultry house equipment for commercial layers, parent stock and turkeys.

Our egg conveyors are fully galvanised for a long- lasting protection against practically all influences. As a result of this treatment, the egg conveyors are free from particles coming off and no dust is attracted statically.

The egg conveyor chains with round steel rods are brightly galvanised, for a long-life span. A small contact surface ensures clean eggs and allows gentle guiding of the eggs sideways for an optimum system capacity and a high percentage of first grade eggs.

To protect egg conveyors which are located outside against weather influences, top covers are available. For easy cleaning of the egg collecting room a dirt collecting belt can be attached under the conveyor system.

We offer four standard system widths and three conveyor chain types, suitable for slopes up to 40 degrees.

Max. degrees

Type spb (flat rods)

Max. degrees

Type spbv (stepped rods)

Max. degrees

Type spbev (extremely stepped rods)

Specifications of our egg conveyors:

Usable width 30 cm. 40 cm. 50 cm. 60 cm.
Frame LxWxH (cm.) 300x35x14 300x45x14 300x55x14 300x65x14
Conveyor speed 4,9 or 5,2 meters per minute
Max. capacity type spb 25.000 eggs/hr 36.000 eggs/hr 45.000 eggs/hr 54.000 eggs/hr
Max. capacity type spbv 25.000 eggs/hr 36.000 eggs/hr 45.000 eggs/hr 54.000 eggs/hr
Max. capacity type spbev 25.000 eggs/hr 36.000 eggs/hr 45.000 eggs/hr
Motor drive unit 400V-3 phase-50 cycles-0,37KW or 0,75 KW
Outer radius curve 115 cm. 153 cm. 188 cm. 224 cm.
Length drive unit 32 or 53 cm.

 

Characteristics and advantages of Farmtec egg conveyors:

  • All structural parts are made of galvanised steel.
  • The rods are connected to the chain links through full welding by a welding robot.
  • The systems have a long-life span and allow high loads in long systems.
  • Open structure, so hardly any dirt attaching. The systems can be cleaned thoroughly and fast, while maintenance is limited to a minimum.
  • Chain guiders in system components, like slope assemblies and curves, are of high-quality wear-resistant materials and hardly require maintenance.
  • Brightly galvanised rods for a long-life span, optimum system capacity and a high percentage of first grade eggs.

You can download our leaflet via the following link: Farmtec Egg Conveyors

Optional available for egg conveyors:

Automatic oil dispenser, stabilisation set for S- curves, top covers, junction conveyor to connect two conveyors to an egg packer/-grader, a dirt collection belt under the system and short intermediate conveyors, driven by egg belt drives of layer nests, if desired.